A4P-S58

product_inner03

Notes of Dimensions

product_inner02

A4P
S58
1. Outer dia. of the stator 58
2. Inner dia. of the stator 38
3. Laminated length of the stator 40~80
Front/Rear F R
4. Height of the end-winding Ld 10 12
Hd 12 14
5. Outer dia. of the rotor 37.6
6. Inner dia. of the rotor/max. Cu 20/28
Al 20/23
7. Width of the-ring 4
8. Height of the-ring 5
9. Outer dia. of the end-ring 37.6

A4P-S58

AL/HD V06
6krpm
200Hz
V09
9krpm
300Hz
V12
12krpm
400Hz
V15
15krpm
500Hz
V18
18krpm
600Hz
V21
21krpm
700Hz
V24
24krpm
800Hz
V27
27krpm
900Hz
V30
30krpm
1000Hz
V33
33krpm
1200Hz
V36
36krpm
1200Hz
V39
39krpm
1300Hz
V42
42krpm
1400Hz
V45
45krpm
1500Hz
Speed
L40 (40mm) 0.2 0.5 0.82 1.05 1.25 1.52 1.67 1.88 2.1 2.26 2.51 2.76 2.97 3.2 Power
[kW]
L50 (50mm) 0.4 0.81 1.13 1.44 1.7 1.95 2.25 2.5 2.8 3 3.25 3.5 3.74 3.95
L60 (60mm) 0.5 0.98 1.41 1.71 2.04 2.37 2.7 3.02 3.35 3.7 3.98 4.3 4.58 4.9
L70 (70mm) 0.6 1.09 1.59 2.01 2.39 2.75 3.1 3.51 3.92 4.3 4.7 5 5.45 5.8
L80 (80mm) 0.69 1.31 1.8 2.34 2.86 3.25 3.73 4.12 4.65 5.1 5.55 5.9 6.22 6.6
Laminated
length
Power [kW]
AL/HD V06
6krpm
200Hz
V09
9krpm
300Hz
V12
12krpm
400Hz
V15
15krpm
500Hz
V18
18krpm
600Hz
V21
21krpm
700Hz
V24
24krpm
800Hz
V27
27krpm
900Hz
V30
30krpm
1000Hz
V33
33krpm
1200Hz
V36
36krpm
1200Hz
V39
39krpm
1300Hz
V42
42krpm
1400Hz
V45
45krpm
1500Hz
Speed
L40 (40mm) 0.31 0.68 0.92 1.1 1.35 1.58 1.8 2 2.25 2.44 2.6 2.8 3 3.19 Power
[kW]
L50 (50mm) 0.5 0.8 1.13 1.41 1.71 2.01 2.31 2.54 2.8 3.1 3.35 3.6 3.85 4.1
L60 (60mm) 0.64 1 1.34 1.72 2.05 2.39 2.72 3.05 3.44 3.76 4.02 4.31 4.62 4.96
L70 (70mm) 0.72 1.17 1.6 2.02 2.39 2.76 3.26 3.69 4.04 4.4 4.73 5.21 5.61 6.07
L80 (80mm) 0.85 1.34 1.88 2.35 2.75 3.28 3.75 4.15 4.71 5.25 5.68 6.16 6.57 6.94
Laminated
length
Power [kW]
  • CU

    The bars and end-rings in the rotor are made from copper to ensure high motor efficiency. This also allows for decreased vibrations from rotation as the shaft is thicker than those used in aluminum rotors.

  • AL

    The bars and end-rings in the rotor are made from aluminum which provides an excellent balance between price and performance.

  • LD

    This stator is dipped into the insulation vanish. It is our most common model which is suitable to general spindle motors.

  • HD

    This copper coil of the stator is filled with special resin which helps to decrease the temperature of coils.