제품소개

Model Number

Example

Let's suppose that you haver chosen

A4P-S60L60V30-CU/LD

  • 1) Dia. of the stator : 60 mm
  • 2) Laminated length : 60 mm
  • 3) Rated speed : 30 krpm
  • 4) Maximum speed : 45 krpm ( = Rated speed x 1.5 )
  • 5) Rated power : 2.6 kW (from S60 table)
  • 6) Material of rotor conductors : Copper
  • 7) Coils of the stator : Dipped into the insulation varnish

Model Number

A□P-S□□L□□V□□-△△/○○

  • A : Induction motors
  • □P : Number of poles
  • S□□ : Outer diameter of the stator [mm]
  • L□□ : Laminated length [mm]
  • V□□ : Rated speed [x1000 rpm]
  • △△ : CU, AL or CS (materials of rotor s conductors)
  • ○○ : LD(Insulation varnish) or HD(Resin Impregnation)

Notes of Dimensions

  • LD
  • HD
  • Rotor

※모바일에서는 좌우로 드래그 하셔서 내용을 확인하실 수 있습니다.

  ① ② ③ ④ ⑤ ⑥ ⑦
Pole Model OD of the stator ID of the stator Length of core Height of the end-winding OD of the rotor ID of the rotor/max. Width of the end-ring
LD HD CU CS
F/R F/R
A2P S40 40 22 20~80 8/10 10/12 21.6 8/13 3 6
S48 48 28 20~80 12/14 14/16 27.6 15.5/18 3 6
S190 190 83 100~200 50/60 -/- 81 40/50 10 13
S240 240 110 100~300 60/70 70/80 107 50/60 10 13
A4P S58 28 38 40~80 10/12 12/14 37.6 20/28 4 6
S60 60 35 40~80 13/14 15/16 34.6 16/25 4 6
S70 70 40 40~100 16/18 18/20 39.5 20/28 4 6
S80 80 50 60~120 18/22 20/25 49.5 24/33 4 6
S83 83 50 60~120 18/22 20/25 49.5 24/33 4 6
S90 90 60 60~150 14/17 16/20 59.4 30/41 5 6
S106 103 65 60~150 23/25 25/28 64.4 40/42 5 6
S135 135 88 100~250 25/27 30/32 87.2 50/60 6 10
S150 150 90 100~230 26/30 30/35 89.2 50/60 6 10
S180 180 115 150~260 40/50 45/55 114 65/80 5 8
S220 220 130 100~300 -/- 50/60 129 55/65 10 13
S260 260 160 120~240 30/40 40/50 159 70/80 10 13
S290 290 155 120~300 -/- 50/60 154 55/65 10 13
A8P S160 160 110 100~270 30/40 -/- 109.2 70/80 5 8
S180 180 130 100~330 30/40 -/- 129 80/90 5 8