A4P | |||
---|---|---|---|
S260 | |||
1. Outer dia. of the stator | 260 | ||
2. Inner dia. of the stator | 160 | ||
3. Laminated length of the stator | 120~240 | ||
Front/Rear | F | R | |
4. Height of the end-winding | Ld | 25 | 30 |
Hd | 30 | 35 | |
5. Outer dia. of the rotor | 159 | ||
6. Inner dia. of the rotor/max. | Cu | 70/80 | |
Al | 70/80 | ||
7. Width of the-ring | 10 | ||
8. Height of the-ring | 20 | ||
9. Outer dia. of the end-ring | 159 |
CU/LD | V03 3krpm 100Hz |
V06 6krpm 200Hz |
V10 10krpm 333Hz |
V20 20krpm 667Hz |
Speed |
---|---|---|---|---|---|
L120 (120mm) | 30 | 60 | 100 | 200 |
Power [kW] |
L160 (160mm) | 40 | 80 | 134 | 268 | |
L200 (200mm) | 50 | 100 | 167 | 334 | |
L240 (240mm) | 60 | 120 | 200 | 400 | |
Laminated length |
Power [kW] |
The bars and end-rings in the rotor are made from copper to ensure high motor efficiency. This also allows for decreased vibrations from rotation as the shaft is thicker than those used in aluminum rotors.
The bars and end-rings in the rotor are made from aluminum which provides an excellent balance between price and performance.
This stator is dipped into the insulation vanish. It is our most common model which is suitable to general spindle motors.
This copper coil of the stator is filled with special resin which helps to decrease the temperature of coils.